What are wall sconces?
"Wall sconces” also known as " wall lamps" and "wall light", is a type of lighting fixture that's mounted to a wall.
Commonly, the lighting decorations are generally mounted on the ceiling, but now, more and more people use a wall sconce to decorate their home, not only it provides light without cluttering up the ceiling but also doesn't take up any space on the floor.
The types of wall sconces/lamps
The most popular and common types of wall sconces in the marke:
- Flush mount wall light
- Semi-flush mount wall light
- Candle sconce
- Spotlight sconce
- Armed sconce
- Recessed light sconce
- Lantern-type wall sconce
- Half-moon sconce
- Floodlight sconce
- Wallchieres
- Picture light
How height should a wall light mounted in?
The mounting height of a wall lamp needs to be considered while buying. The upward-facing sconces should generally be mounted around 20 inches from ceiling so that it can accentuate the beauty of the ceiling or designer ceiling. For smaller designs (generally used in bathrooms next to mirror), they should be mounted according to user’s height
How to Replace a Wall-Mounted Light Fixture
What Tools You Need:
- Non-contact circuit tester
- Screwdriver
- Electric Drill
- New wall sconce light fixture
- Wire connectors (wire nuts)
Replacing a wall-mounted light fixture is a relatively simple DIY project that can be done with a few basic tools and some electrical know-how. Here are the steps to follow:
Turn off the power to the existing fixture by switching off the circuit breaker that controls it.
Remove the old fixture by unscrewing the mounting screws or nuts that hold it in place. If the fixture is particularly heavy, it may be necessary to have a helper support it while you disconnect the wires.
Once the old fixture is removed, you should see the electrical box that it was attached to. Inspect the box to make sure it is in good condition and securely mounted to the wall. If the box is damaged or not securely attached, you may need to replace it before installing the new fixture.
Check the wiring in the box to make sure it is in good condition and properly connected. If the wiring is frayed, corroded, or otherwise damaged, you should replace it before installing the new fixture.
Connect the wires from the new fixture to the wires in the electrical box. Typically, you will need to connect the black or red wire from the fixture to the black or red wire in the box, the white wire from the fixture to the white wire in the box, and the green or bare wire from the fixture to the green or bare wire in the box. Use wire connectors to secure the connections, and wrap the connections with electrical tape for added safety.
Attach the new fixture to the mounting bracket or plate that is attached to the electrical box. Make sure the fixture is level and securely attached.
Turn the power back on and test the new fixture to make sure it is working properly.
That's it! With these simple steps, you can replace a wall-mounted light fixture and give your room a fresh new look. However, if you are unsure about any part of the process, or if you have any doubts about your ability to complete the job safely, it's always best to consult a licensed electrician.
